19PC Flat Wood Boring Bits Set in canvas bag

Categories

Article NO. A0038103

19PC Flat Wood Boring Bits Set in canvas bag

Contains: 1/4”, 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/8", 1-1/4",1-3/8", 1-1/2" + 1pc extension bar + 1pc hex key

Feature:

Made of high carbon steel, hardened. Sharpened centre point and ground 2 cutting-edges on both sides, hexagon-shank.

Application:

These bits are used for rough boring in wood, plywood, chipboard, fibre board, etc.

With a small hole drilled through the flat part, allowing this bit to be used much like a installer bit, with a wire threaded through the transverse hole.